Laptop Dead Motherboard Fix


                   Laptop computer Useless Motherboard Restore

This text is just for the skilled individuals who know effectively, how you can assemble and disassemble laptops.I’ll clarify the fundamental troubleshooting of the motherboard. In case your laptop computer would not begin, Is it unhealthy energy jack or energy fuse.To illustrate whenever you begin your laptop computer put the charger in and press the facility button on and it would not present any response.

Electronic Repairing

What’s the attainable error??

To begin with it’s best to test the adapter by the assistance of multimeter. Whether it is working effectively then take away the highest cowl of the laptop computer.As you possibly can see the image given under the facility adapter plugs into the DC-IN (DC-IN is the facility jack on the again aspect or on different sides of your laptop computer.) of  energy jack which is related to the motherboard with the assistance of harness.

Electronic Repairing

In some motherboards the DC-IN energy jack is straight soldered with the mom board.
Now plugin the facility adapter within the socket and test the voltage with the assistance of multimeter on the level the place DC-IN jack or DC harness is related to the motherboard. Now If you’re studying the identical worth of voltage as seen in case of adapter then DC-IN jack or DC harness is working correctly and the fault exists within the motherboard.And if there isn’t a voltage then the DC harness should have to get replaced.
You then also needs to test the fuse utilizing multimeter which is situated close to the DC-harness.If the fuse is unhealthy then after changing it the laptop computer will begin.

Electronic Repairing

If the issue nonetheless exists, then you’ll have to disassemble the laptop computer and separate motherboard for testing. It’s a must to clear all of the elements from mud as we all know that mud turns into an blockage  in the direction of the conduction. So it’s best to at all times remember the fact that everytime you open the laptop computer clear it from mud fully.Now take a overview that your laptop computer has any unfastened connection or poor solder.In case you did not discover any unfastened connections or poor solder then only for contentment re-solder all of the SMD elements specifically on the facility part. 
Notice: Now a days all of the laptops are designed on a floor mounted machine or SMD mode and this hardly ever have unfastened connections.However re-solder solely to your satisfaction.
After doing all this now it’s best to insert the facility plug in and test all of the digital elements that may be examined with multimeter so it’s best to test whether or not if there may be any part that causes any brief circuit downside.Now the one elements you haven’t examined are dc energy jack and fuse.
Now take a look at the dc energy jack from enter to floor as in my case the issue was present right here.It was actually shorted.I used x1 vary of multimeter to check the fault.Additionally on additional inspection i discovered a shorted diode.The rationale behind the brief circuit of dc energy jack is the shorted diode.Changing the diode brings my laptop computer again to life.

Leave a reply "Hello world!"